Description

1 litre Pipeline Original Beer Line Cleaner

A classic original alkaline beer line cleaner with built-in solution status indicator and bactericides for long-lasting effect. Safe to use on all types of line materials, pipes, meters, pumps, beer engines, taps and fittings if used in the prescribed manner. Quite simply: The pipeline changes colour if the line is dirty. Follow the colour changes after each soak and when the fluid comes out the same colour as it went in, you know that the line is absolutely yeast and bacteria-free. Rinse in clean cold water.

INSTRUCTIONS FOR PIPELINE ORIGINAL

Dilution rate:

• 2.5% (250ml per 10 litres water)

Cleaning:

• Switch off coolers. Make up the cleaning solution in a suitable plastic container with cold or warm water (<40C). Pump the solution through the dispense head into a receiving bucket until the emergent liquid is purple. After 5 minutes draw a full line of solution, discarding discoloured fluid until the liquid is purple. Repeat this process until the purple colour is stable throughout the dispensing system.

Rinsing:

• Pump fresh cold water through to dispel all purple fluid, followed by several pints of water. Switch the coolers back on and reconnect the dispensed product.